MELAG Vacuklav 41 B Plus Evolution - Subsequent Log Output

8 Logging
37
Information regarding the setting of immediate output and the desired output medium is provided in the
chapter Settings, logging [}page 43].
Subsequent log output
TheLog output menu provides the option of outputting text logs subsequently and independently of the
point of the program end. You can set the output media yourself. The output medium is selected as
standard, which are also selected underSettings →Logging, as far as automatic immediate output is
activated.
The Log output menu offers various opportunities for log output. All program logs present in the memory
are displayed in the Logging list. You can sort the list according to date, time, program and outcome by
pressing on the column headings. Here is an overview of all possible output media.
Designation File ending Explanation
Last log .PRO The log of the last successful completed program is
outputted.
Logs of the day .PRO The log of the last successful program of the current day is
outputted.
Logs of the week .PRO Logs of all successfully completed programs of the week -
Monday to Sunday - are outputted.
Logs of the month .PRO Logs of all successfully completed program performed in the
current month are outputted.
All logs .PRO The logs of all the successfully completed programs are
outputted.
Last fault log STR The last malfunction log are outputted.
Fault logs of the day .STR The malfunction logs of the current day are outputted.
etc. ...
Legend log file .LEG Contains an explanation of all abbreviations contained in the
log.
Status log .STA A summary of all important settings and system states
(counter, measured values etc.)
Fault in standby .STR This log type is generated following the malfunctions
registered during a time at which no program was active.
System log .LOG A sort of log book listing all malfunctions and changes to the
system in order of their incidence.
Delete all logs Deletes all logs stored in the internal log memory. Caution: All
logs will be deleted which were not previously outputted to
another output medium.
Outputting a log from the log list
Proceed as follows to output a specific log from the internal memory:
1. Navigate to theLog output menu and
selectLogging list.