MELAG Vacuklav 41 B Plus Evolution - Display and Energy Saving Settings

10 Settings
53
Date & time
Correct batch documentation requires the correct date and time setting on the steam sterilizer. Ensure that
you take into account the clock change in autumn and summer, as this is not adjusted automatically. Once
the time has been set on the steam sterilizer, it is very accurate. Set the date and time as follows:
1. SelectSettings →Date & time. The display
switches to the settings window.
2. Select the parameters which you wish to change
(day, month, year / hour, minute second). The
marked parameter is depicted light blue, here e.g.
the hour.
3. Change the respective value via the and
pushbuttons. Repeat this step for all the
parameters which you wish to change.
4. Confirm the changes with SAVE.
Ê The display will be restarted after saving and
then changes automatically to the Programs &
Tests menu.
Brightness
1. SelectSettings →Brightness. The display
switches to the settings window.
2. Press the pushbuttons or to adjust the
brightness and contrast on the display.
3. Accept all the settings with SAVE and then leave
the menu.