----------------------------------------
!0 01100ED0E001
!1 E00T717U.PRO
----------------------------------------
10 MELAG Vacuklav 41 B+
----------------------------------------
15 Program: Universal-Program
20 Program type: 134 °C wrapped
25 Date: 09.03.2017
30 Daily batches: 14 Total: 01578
35 User: Deactivated
36 Indicators changed: deactivated
37 Batch approved: deactivated
======
40 Universal-Program successfully
completed
42 = =
======
45 Temperature: 135.3 +0.25/-0.18 °C
50 Pressure: 2.17 +0.02/-0.01 bar
55 Plateau time: 05 min 30 s
60 Conductivity: 8 µS/cm (359:11.1)
65 Start time: 20:22:01
70 End time: 20:43:19 (21:18 min)
======
80 SN:201441-B1051
======
81 MR V3.218 09.03.2017
82 Para V3.226 17.02.2017
83 BO V3.323 09.03.2017
----------------------------------------
Step Time t[m:s] P[mbar] T[°C]
SP-S 0:00 0:00 1002 96.3
SK11 0:13 0:13 1680 95.7
SK12 0:37 0:24 1285 104.8
SK11 0:46 0:09 1665 106.8
.
.
SK22 2:38 0:20 1284 116.6
SF12 3:12 0:34 499 112.7
SF13 3:42 0:30 1667 113.3
.
SF43 8:25 0:24 1749 113.6
SH01 9:10 0:45 2780 130.5
SH02 9:31 0:21 2847 131.7
SS01 9:53 0:22 3065 134.0
SS02 15:23 5:30 3169 135.3
SA00 15:53 0:30 1292 112.1
SI02 17:33 1:40 79 57.9
.
SB10 21:14 0:12 804 91.3
SB20 21:18 0:04 919 92.3
SP-E 21:18 0:00 925 92.3
>> Never change the code in the following
line <<
010041D8BE14B1319E55772A0DF975054F7EBF32
EE1372767ED3B3801EB10F3FB01A3212D41D7144
1C3B8B6474777962766F018680B68C56C219074F
D6E7814D506F0A2F3077782541CC2CD05C425DA1
9A5EF5192C68174C868556542F7B8B05E97C6E46
16CDCFFA811E126FD67363FB74128A5F83AE6F37
F45A9E240C88615F1618D340060C1027205C83C2
>>Authentication of batch log<<
----------------------------------------
0.00 0.0 0.0 0.0 ---.- 0.0
-edk----etm---etd---etp---etv--ett-END-
!0 Ident number
!1 File name
----------
10 Steam sterilizer type
----------
15 Program name
20 Program sterilization parameters
25 Date
30 Daily and total batch number
35 User ID
36 Batch indication
37 Batch approval
=====
40 Control notification
42 Warning or malfunction message with program abort
=====
45 Sterilization temperature with max. deviations
50 Sterilization pressure with max. deviations
55 Sterilization time
60 Conductivity of the feed water
65 Time at program start
70 Time at program end
==========
80 Device serial number
==========
81 Current version of the device firmware
82 Current version of the device parameters
83 Current version of the user interface
----------
Step – Program step
Time – Time (min:sec) which has elapsed since the program
start
t [m:s] – Duration (minutes:seconds) which a program step
requires
P [mbar] – Chamber pressure
T [˚C] – Chamber temperature
Key for the program steps:
SK – Conditioning
SF – Fractionation
SH – Holding
SS – Sterilization
SA – Pressure release
ST – Drying
SI – Intelligent drying
SB – Ventilation
SP-E – End
Proof of authenticity (electronic signature)Should never
be altered; decoding the code (by MELAG) indicates
whether the data was generated on a MELAG steam
sterilizer and has been changed.
----------
Sensor measurement values are displayed here in the
case of a malfunction. The values are helpful for a
technician.
To Next Page
Loading...
