2 Safety
8
Program termination
n Please observe that depending on the time of the program abort, opening the door following a pro-
gram abort can lead to hot steam leaving the chamber.
n Depending on the time of the program abort, it is possible that the load is unsterile. Observe the clear
instructions shown on the display of the steam sterilizer. If necessary, sterilize the affected objects
after rewrapping.
Removing the sterilized equipment
n Never use force to open the door.
n Use a tray jack to remove the tray. Never touch the sterilized items, the chamber or the door with un-
protected hands. The components are hot.
n Check the packaging on the sterilized equipment for damage when removing it from the steam steril-
izer. Should the packaging be damaged, re-pack the sterilization material and re-sterilize it.
Transport and storage
n Store and transport the device in a frost-free environment.
n The device should always be carried by two people.
n Use suitable carrying straps to carry the device.
Maintenance
n Have the maintenance done only by authorized persons.
n Maintain the specified servicing intervals.
n Only original MELAG spare parts may be used.
Malfunctions
n Should the device issue the same malfunction message repeatedly, turn off the device
and if necessary, inform your stockist.
n Only have the device repaired by authorized persons.
To Next Page
Loading...
