47 of 289
Right Upper V-Rail
9. Color change to needle #1.
10. Using a piece of lint-free cloth, wipe clean both the front and back surfaces of the upper v-rail on
the RIGHT side of the needlecase.
11. After cleaning the v-rail, use a small oiler bottle to apply a drop of oil each to the front and the
back surfaces of the v-rail. Apply the oil close to the needlecase.
Oil Needle Bars (Lower)
12. Using a small oiler bottle, apply one (1) drop of sewing machine oil to each of the sixteen (16)
needle bars through the hole in the needlecase as shown in the image.
Oil Needle Bars (Upper)
13. Using a small oiler bottle, apply one (1) drop of sewing machine oil to each of the sixteen (16)
needle bars by guiding the oiler applicator through the vertical slots of the needlecase cover just
below the take up lever arms as shown in the image.
14. Close out of the Head Timing Tab.
To Next Page
Loading...
