Melco N10 - Network Configuration

35
Chapter 3 Advanced Usage
7 Press the Menu/Enter button ( ).
Changing the IP Address
To change the IP address of the N10/N100, follow the procedure below. After the procedure is finished, the N10/
N100 will automatically restart and stop any importing or playback operations. We recommend finishing any file
import or playback before changing the N10/N100’s IP address.
1 Press the Menu/Enter button ( ) to display the menu list at the home screen.
2 Press the Up/Down buttons (  ) and select “Settings”, then press the Menu/Enter button ( ).
3 Press the Up/Down buttons (  ) and select “Network”, then press the Menu/Enter button ( ).
4 Press the Up/Down buttons (  ) and select “LAN Port”, then press the Menu/Enter button ( ).