Melco N10 - Changing the Display Language

42
Chapter 3 Advanced Usage
4 Press the Up/Down buttons (  ) and select the desired time setting, then press the Menu/Enter button
( ).
5 Press the Menu/Enter button ( ).
If the N10/N100 is powered off by auto power save, the power button will not automatically revert to the off
position. To turn the N10/N100 on, press the power button to return it to the off position, and then press it again to
power on the N10/N100.
Changing the Display Language
To change the display language, follow the procedure below. After the procedure is finished, the N10/N100 will stop
any file playback. We recommend finishing any file playback before changing the display language.
1 Press the Menu/Enter button ( ) to display the menu list at the home screen.
2 Press the Up/Down buttons (  ) and select “Language”, then press the Menu/Enter button ( ).