WARNINGS AND CAUTION NOTES
IMPORTANT NOTE
Please Notice: The product specifications and other information contained in this manual are subject to
change without notice. Mensor Corporation has made a concerted effort to provide complete and current
information for the proper use of the equipment. If there are questions regarding this manual or the proper
use of the equipment, contact Mensor Corporation at:
TEL 1.512.396.4200 or 1.800.984.4200 (USA only)
FAX 1.512.396.1820
WEB SITE http://www.mensor.com
E-MAIL sales@mensor.com
tech.support@mensor.com
quality@mensor.com
CAUTION: USE THE PROPER PRESSURE MEDIUM. USE ONLY CLEAN,
DRY NON-CORROSIVE GASES. THIS INSTRUMENT IS NOT DESIGNED
FOR OXYGEN USE.
WARNING: NOT EXPLOSION PROOF!
Installation of this instrument in an area requiring devices rated as intrinsically
safe is not recommended.
WARNING: POSSIBLE INJURY!
The tubing, valves and other apparatus attached to the gauge must be adequate
for the maximum pressure which will be applied, otherwise physical injury to the
operator or bystanders is possible.
WARNING: HIGH SOUND LEVELS!
Pressures from 600 psig and up can generate sound levels above 100 db for brief
periods when they are exhausted directly to atmosphere. If no muffling devices are
attached to the EXHAUST port, then ear protection is advised for personnel in
the vicinity of instruments that will be operated under such conditions.
WARNING: HIGH PRESSURE!
High pressure gases are potentially hazardous. Energy stored in these gases can be
released suddenly and with extreme force. High pressure systems should be assembled
and operated only by personnel who have been trained in proper safety practices.
CAUTION: ESD PROTECTION REQUIRED. The proper use of grounded
work surfaces and personal wrist straps are required when coming into contact
with exposed circuits (printed circuit boards) to prevent static discharge to
sensitive electronic components.
PCS 400 PREFACE
www.mensor.com iii
To Next Page
Loading...