2 – TRANSPORT CASE
A wheeled Transport Case is available suitable for
moving the PCS 400 between sites, or as an air-
freight (or other) shipping container. The case is
constructed of a high impact plastic with a black
exterior. It includes two keys, locks, a piano hinge,
an anodized interlocking tongue and groove open-
ing, various nickel-chrome and stainless steel fix-
tures, a vinyl satchel style handle and a retractable
pull-out handle. The interior is filled with high
density polyurethane foam with a die-cut cavity to
cradle the instrument with fitting adapters in place,
and an additional cavity to store related accesso-
ries. Rugged and weather resistant, the case makes
an attractive, practical shipping and moving con-
tainer. The case weighs approximately 29 pounds
(13.15 kg) unloaded, and can support a load of up
to 150 pounds (68.04 kg). Nominal dimensions are
15 inches by 24 inches by 26 inches (38.10 cm x
60.96 cm x 66.04).
Wheels
Retractable Handle
Figure 8.4 - Transport Case
OPTIONS PCS 400
8-4 www.mensor.com
To Next Page
Loading...