02
Chapter 1 Introduction
Name Status Indication
LAN
On The corresponding LAN port is connected.
O The corresponding LAN port is not connected.
Flashing The corresponding LAN port is transmitting/receiving data.
1.2.2 Physical Interface
The following parts are located on the rear panel (View from left to right).
Item Description
Power
The power socket is where you will connect the power adapter. Please use
the power adapter provided with this router.
WAN This port is where you will connect the DSL / Cable modem, or Ethernet.
1-2(LAN) These ports connect the router to the local devices.
WPS/Reset
Press this button for 1 second to use WPS function.
Press and hold this button for more than 5 seconds to reset the router.
Wireless
antenna
To receive and transmit the wireless data.
To Next Page
Loading...
