55
Chapter 5 Advanced Conguration
• Add unconnected devices
Click Add Manually and enter the Device Name and MAC Address of the device
you want to be allowed.
Done!
Now you can block or allow specic client devices to access your network (via wired
or wireless) using the Blacklist or Whitelist.
5. 6. 3. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device’s IP address to its MAC address. This will prevent ARP Spoong and
other ARP attacks by denying network access to a device with matching IP address
in the Binding list, but unrecognized MAC address.
I want to:
Prevent ARP spoong and ARP attacks.
How can I do that?
To Next Page
Loading...
