Mercusys MR50G - Internet

22
Chapter 5 Advanced Conguration
• Primary & Secondary DNS - The IP addresses of DNS (Domain Name
System) server.
• LAN - This eld displays the current settings of the LAN, and you can congure
them on the Advanced > Network > LAN page.
• MAC Address - The physical address of the router.
• IP Address - The LAN IP address of the router.
• Subnet Mask - The subnet mask associated with the LAN IP address.
• DHCP Server - This eld displays the current settings of DHCP (Dynamic Host
Conguration Protocol) Server, and you can congure them on the Network >
DHCP Server page.
• DHCP Server - Indicates whether the DHCP server is enabled of disabled. It
is enabled by default and the router acts as a DHCP server.
• IP Address Pool - The IP address range for the DHCP server to assign IP
addresses.
• Dynamic DNS - This eld displays the current settings of the Dynamic DNS
(Domain Name System), and you can congure them on the Advanced > Network
> Dynamic DNS page.
• Service Provider - The Dynamic DNS service provider you have signed up
for.
• Host Name - The Domain Name you have entered in the Dynamic DNS page.
• Status - The status of the Dynamic DNS service connection.
5. 1. 2. Internet
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to Advanced > Network > Internet.
3. Set up the internet connection and click SAVE.
Dynamic IP
If your ISP provides the DHCP service, please select Dynamic IP, and the router will
automatically get IP parameters from your ISP.
Click RENEW to renew the IP parameters from your ISP.
Click RELEASE to release the IP parameters.