Mercusys MR50G - System Log

64
Chapter 5 Advanced Conguration
• Allow a specic device to manage the router remotely:
1. Tick the Enable checkbox of Remote Management.
2. Keep the HTTP port as default setting (recommended) or enter a value between
1024 and 65535.
3. Select Specied Device for Remote Managers.
4. In the Only this IP Address eld, enter the IP address of the remote device to
manage the router.
5. Click SAVE.
Devices using this WAN IP can manage the router by logging in to http://Router’s
WAN IP:port number (such as http://113.116.60.229:1024).
Tips: The router’s WAN IP is usually a dynamic IP. Please refer to Dynamic DNS if you want to log in to the router through a
domain name.
5. 8. 6. System Log
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to Advanced > System > System Log, and you can view the logs of the router.