Mercusys MR50G - Ipv6; Ipv6 Status

57
Chapter 5 Advanced Conguration
5.7 IPv6
This function allows you to enable IPv6 function and set up the parameters of the
router’s Wide Area Network (WAN) and Local Area Network (LAN).
5. 7. 1. IPv6 Status
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to Advanced > IPv6, and you can view the current IPv6 status information of
the router.
3. Enable IPv6 and select the mode: Router or Pass-Through (Bridge).
• If you select Router:
Fill in WAN and LAN information as required by dierent connection types.
• Normal: The default connection type.
1 ) Congure the WAN settings.
2 ) Congure the LAN settings. Fill in Address Prex provided by your ISP.