41
Chapter 5 Advanced Conguration
2. Enter the PIN of your device and click CONNECT. Then your device will get
connected to the router.
• Connects via the Router’s PIN
1. Keep the WPS Status as Enabled and select Router’s PIN.
2. Enter the router’s PIN on your personal device. You can also generate a new one.
Note:
PIN (Personal Identication Number) is an eight-character identication number preset to each router. WPS supported devices
can connect to your router with the PIN.
Method TWO: Push the WPS Button
Click Start on the screen. Within two minutes, press the WPS button on your device.
A Device-(X X-X X-XX-XX-XX-XX) Connected message should appear on the screen
and the SYS LED should change from blinking to solid on, indicating successful WPS
connection.
Note:
XX-XX-XX-XX-XX-XX is the MAC address of your device.
To Next Page
Loading...
