Mercusys MR50G - Page 59

50
Chapter 5 Advanced Conguration
4. Add basic prole information.
1 ) Enter a Name for the prole to make it easier to identify.
2 ) Under Devices, click
.
3 ) Select the devices that belong to this family member. Access restrictions will
be applied to these devices. Click ADD when nished.
Note: Only devices that have previously been connected to your router’s network are listed here. If you are
unable to nd the device you want to add, connect it to your network and then try again.
4 ) Click NEXT.
5. Block content for this prole.