300Mbps High Power Wireless N Router
access the local host resources or devices as needed. UPnP devices can be automatically
discovered by the UPnP service application on the LAN.
• Application Description - The description about the application which initiates the UPnP
request.
• External Port - The port which the router opened for the application.
• Protocol - The type of protocol which is opened.
• Internal Port - The port which the router opened for local host.
• IP Address - The IP address of the local host which initiates the UPnP request.
• Status – Displays the port is active or not.
• Refresh - Click to update the current UPnP settings List.
5.4.4 Advanced Routing
Go to Advanced Users→Advanced Routing, and then you can configure the static routing and
view system routing list. Advanced routing is used to predetermine a fixed route for the
network information packets to reach a specific host or network.
●
Static Routing
• Destination Address - The address of the network or host that you want to assign to a
static route.
• Subnet Mask - The Subnet Mask determines which portion of an IP Address is the network
portion, and which portion is the host portion.
• Next Hop - The IP Address of the gateway device that allows for contact between the
router and the network or host.
• Edit - Here you can edit an existing entry.
- 40 -