300Mbps High Power Wireless N Router
1. Download the latest firmware upgrade file from our website (www.mercusys.com).
2. Click Browse to locate and select the downloaded firmware file.
3. Click Upgrade.
4. The router will reboot automatically after the upgrade.
5.5.4 Backup & Restore
Go to System Tools→Backup & Restore, and then you can save the current configuration of
the router as a backup file and restore the configuration.
Click Backup to save all configuration settings as a backup file to your local computer.
To upgrade the router's configuration, follow the steps below.
1. Click Browse to locate and select the configuration file which you want to restore.
2. Click Restore to update the configuration with the file you have selected.
To avoid any damage, it is important to keep router powered on during the entire process.
1. All current configurations will be lost once the router is restored.
2. To avoid any damage, keep the device powered on during the process
3.
After the upgrade process is complete (about 20 seconds), the device will reboot
automatically.
- 46 -