METER ZL6 - Page 46

41
ZL6
• Show Raw Data/Show Processed Data: Toggle showing raw or processed data in the
instantaneous measurements area of the main screen. Use the raw data display to help
troubleshoot poor sensor measurements.
WINDOW MENU
The Window menu provides the Show Terminal option. This allows for direct entry of
commands to the ZL6 and is mainly used for troubleshooting.
HELP MENU
The Help menu has five options.
• Check for Software Updates: Checks for the newest available version of the ZENTRA Utility.
If a newer version is available, a prompt will appear to install the update. The computer
must be connected to the internet for this feature to work. ZENTRA Utility checks for
newer versions of the program each time it launches. It will download these updates in the
background automatically.
• Check for Logger Firmware Updates: Checks for the newest version of ZL6 firmware
from METER. If a newer version is available, ZENTRA Utility downloads the firmware in
thebackground.
When ZENTRA Utility connects to an ZL6, it compares the firmware on the logger with the
latest version available. If the ZL6 firmware is out of date, ZENTRA Utility will prompt to
start a firmware update for the logger. ZENTRA Utility maintains a cache of logger firmware
to allow field firmware updates without a connection to the internet.
• Update Sensor Firmware: Some METER sensors (e.g., ATMOS and TEROS sensors) allow
for firmware updates via ZENTRA Utility. Please consult the sensor user manual for
moredetails.
• Send Feedback to METER: Sends product feedback, bug reports, or feature requests to
METER when connected to the internet (Figure23).