|
19
VIKING / VIKING COMBI
Rev. 2.0 (1.8.2017)
Operating instructions
Cover for lid opening
Opening the safety grid:
1. Turn the safety grid to an upright position, the slots in the hinges keep it in an open position. If the
mixer is running it will stop.
Closing the safety grid:
1. Lift the safety grid lightly upwards and turn it after that down over the kettle.
2. If necessary, switch the mixer on according to the instructions given below.
Opening of the whole safety lid:
1. Switch off the mixer if it is on.
2. Lift the safety lid by the black part of the lifting arm to its utmost position. The gas spring will keep it
in the open position.
3. If the cover for the lid opening was on, it remains on the safety grid because of a locking peg.
Locking peg
To Next Page
Loading...
