Metrohm 756 KF User Manual

3.3 Text input
756/831 KF Coulometer, Instructions for Use
16
3.3 Text input
<CLEAR>
<QUIT>
<ENTER>
Example: storing a method:
• Press key <USER METH>.
Place the cursor to
>store method and press
<ENTER>.
The name of the method which is currently in the
working memory is displayed.
• Delete this name with <CLEAR>.
• Open the "text writing mode" with key <ABC>.
You can now select the desired character by means
of the cursor keys, then confirm this character. Se-
lect the next character...
When you have confirmed the last character, i.e.
your name is complete, you quit the text writing
mode with <QUIT>.
Now confirm the name with <ENTER>.
• During text input you can correct typing errors with
<CLEAR>:
<CLEAR> deletes the characters one by one.
• If you wish to modify an existing name (e.g. if you
have names like Text 1, Text 2, Text 3), do not delete
the existing name before you start the text input
mode. Proceed as follows:
1. Press <USER METH>, place the cursor to
>store method and press <ENTER>.
2. Open the text writing mode directly: Press key
<ABC>.
3. <CLEAR> now deletes the characters one by
one or you can add additional characters.
4. If your text is complete, leave the text writing
mode with <QUIT> and confirm the text with
<ENTER>.
You may also enter texts by means of a connected PC keyboard, see page 124.
user methods
>store method:
method name:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
µ°!"#$&'()*+,-./ 0123456789
user methods
>store method
method name: Text
user methods
>store method
method name: ********
REPORTS
ABC
.

Metrohm 756 KF Specifications

General

Brand	Metrohm
Model	756 KF
Category	Measuring Instruments
Language	English