Installation
© Meyn Food Processing Technology B.V. 17
3 Installation
This chapter gives a description of the actions that must be performed before the
machine can be used.
3.1 Installing the Meyn vent cutter
When the machine is delivered, the adjustment of the movable parts of the machine
has already been done at the factory. In chapter 7, Disassembly/assembly and adjust-
ments, is given the information about disassembly and assembly of parts you must do
to ensure the machine performs optimal.
The machine has to be placed level and stable. If necessary the machine can be ad-
justed by means of the adjustable legs.
3.1.1 Required floor area
Floor area required: The surface area (L∗W) occupied by the machine is given in para-
graph 1.1 “Technical specifications”. Nevertheless, it is desirable to install the ma-
chine on a floor area that makes it easy to clean and maintain. Meyn advises you to
keep a clear space of 1 meter on all sides of the machine.
To Next Page
Loading...