Meyn 0100-5 - Lubrication Points

Maintenance and trouble shooting table
© Meyn Food Processing Technology B.V. 33
6.3 Lubrication-point list
Table 6.2 Lubrication-point list
Part lubricant
Daily after cleaning,
Slide shafts.
Vegetable oil.
Daily after cleaning,
The drill units
Vegetable oil.
Every two weeks,
Bearings drive wheel.
See section 6.1
Every two weeks,
Bearings upper plate.
See section 6.1
Every two weeks,
Bearings lower plate.
See section 6.1.
Every two weeks,
Bearings lift-up drum.
See section 6.1.