MHM SYNCHROPRINT 3000 - Basic Menu Configuration Flow

Operating Instructions - Synchroprint 3000 (Manual-Registration Version)
________________________________________________________________________________
Operating Instructions - Synchrprint 3000 (Manual-Registration Version) V1-1 Page 28 of 49
7.1.3. Cleaning of the Touch Screen
The surface must only be cleaned with a dry cloth or appropriate monitor-cleaning cloth.
MHM recommends covering the touch screen with a self-adhesive clear protective foil, which may
be applied to the actual touch screen and taken off and renewed at any time.
7.2. Basic Menu Configuration
If any aggressive cleaners or solvents are applied, the surface of the touch
screen will be damaged or destroyed, resulting in cancellation of the warranty.
Command screen
START
ON
Main control switch
Command screen
TABLE POSITION
Command screen
MENU
Command screen
ADJUST
Command screen
MANUAL
Command screen
AUTOMATIC
Command screen
SETUP
Command screen
SELECT
STATION
Command screen
CHANGE
PALLETS
SERVICE 1
SERVICE 2
Command screen
WARM UP
PALLETS
Command screen
WARM UP
PALLETS