MHM SYNCHROPRINT 3000 - 11 Warranty

Operating Instructions - Synchroprint 3000 (Manual-Registration Version)
________________________________________________________________________________
Operating Instructions - Synchrprint 3000 (Manual-Registration Version) V1-1 Page 49 of 49
11. Warranty
This section details the terms and conditions of the warranty which must be observed in addition to
MHM’s general terms and conditions of business.
Warranty and liability claims for personal injury and material damage are excluded if they can be
attributed to or are a result of one or several of the following:
 Improper use of the Synchroprint 3000.
 Incorrect assembly, operation or maintenance of the Synchroprint 3000 by the operator.
 Operation of the machine with defective safety devices and/or safety devices which are
missing/removed or not in correct working order.
 Failure to comply with the safety instructions in this document with regard to transportation,
assembly, start-up, installation, operation, control and maintenance of the Synchroprint
3000.
 Failure to comply with the Operating Instructions.
 Unauthorised modifications to the Synchroprint 3000 (e.g. disassembly of original MHM
components and/or use of any non-original MHM components)
 Unauthorised modifications to any part of the drive or control systems (e.g. change of
control components or frequency converters).
 Lack of monitoring and maintenance of machine parts/components subject to wear and tear.
 Repair measures, maintenance or service work carried out by unauthorised persons.
 Use of lubricants other than those recommended by MHM.
 Operation of the machine under technical conditions other than those specified by MHM
(e.g. excessive power supply voltage and/or excessive air pressure).
 Damage by any foreign object and/or force majeure.
 Omission of specified maintenance, service measures and procedures.
 Operation of the Synchroprint 3000 by untrained personnel.