Operating Instructions - Synchroprint 3000 (Manual-Registration Version)
________________________________________________________________________________
Operating Instructions - Synchrprint 3000 (Manual-Registration Version) V1-1 Page 36 of 49
Pieces/counter displays:
During production will display the production speed/rate of the machine
(Pieces per hour).
Displays the total number of pieces to be produced
During production will display the number of pieces remaining
During production will display the number of pieces already produced
This will display the number of mis-loaded/faulty or incorrect prints.
7.7.1. Command screen ‘WARMUP PALLETS’
This screen allows the operator to control the pallet ‘warm-up’ feature along with the drying times
for any flash cure units being used. (Only if connected to the machine via the data lead).
START Starts the pallet ‘warm-up’ feature.
STOP Stops the pallet ‘warm-up’ and reverts back to the ‘MANUAL’ screen.
DRYERTIME Allows the drying time to be set for each flash cure unit individually. (A
separate command screen will be displayed for these settings).
MENU Exits this screen and returns to the ‘MENU’ screen.
To Next Page
Loading...
