© Microhard Systems Inc. CONFIDENTIAL 87
IP9xx Series
6.0 Configuration
Optimization
High Throughput
Balanced
Low Latency
Values
This setting applies to the Master only.
‗Balanced‘ is the default setting and is typically the best choice for
‗Optimization‘. The other options are High Throughput (when
throughput is a priority) and Low Latency (best suited to small
packets).
Optimization is a trade-off between throughput and latency.
Zone Restriction
Zone restriction dictates within which band (zone) of frequencies
that a particular unit will operate.
Using zones simplifies network deployment by providing a
convenient reference (e.g. Zone 1) within which a given network
can operate, thereby minimizing the potential for internetwork
interference. This is particularly useful when used in conjunction
with Network Search Mode to facilitate minimal interference among
adjacently deployed networks.
The tables on the following page illustrate the various zones and
their associated frequency restrictions. Note that there is a
difference between zone ‗values‘ depending on the Wireless Link
Rate selected.
continued…
To Next Page
Loading...
