network.
11b/g mixed mode: Select it if you have only Wireless-B and
Wireless-G clients in your network.
11b/g/n mixed mode: Select it if you have Wireless-B,
Wireless-G and Wireless-N clients in your
network.
SSID: It is the unique name of the wireless network and can be
modified. The SSID must be entered.
Broadcast (SSID): Select “Enable” to enable the router’ SSID to be
scannable by wireless devices. The default is enabled. If you disable
it, the wireless devices must know the SSID for communication.
Channel: The currently used channel by the router. Select an
effective channel (from 1 to 13\Auto) of the wireless network.
WMM Capable: Enable it to enhance the transfer performance of
the wirelessly transferred multimedia data (such as video or online
playing).We recommend enabling this option if you are not familiar
with WMM.
APSD Capable: It is used for auto power-saved service. The default
is disabled.
Channel bandwidth: Select an appropriate channel bandwidth to
enhance the wireless performance. Select 20/40M when the network
has 11b/g and 11n wireless clients. Select 20M when the network
has only non-11n wireless clients. Select 20/40M to promote its
throughput when the wireless network is in 11n mode.
Extension Channel: To confirm the network’s frequency range in
11n mode.
NOTE: Some products may have primary SSID and secondary SSID
options, as shown below. Primary SSID is necessary, secondary SSID is
optional.
To Next Page
Loading...
