9 Routing Settings
9.1 Routing Table
This page shows the router’s core routing table.
The main duty for a router is to look for a best path for every data packet,
and transfer this data packet to a destination station. In order to fulfill this
function, many transferring paths, i.e. routing table, are saved in the router,
for choosing when needed.
9.2 Static Routing
This screen is used to set the router’s static routing.
A static route is a pre-determined pathway that network information must
travel to reach a specific host or network.
Destination network IP address: The destination host or IP
segment you visit.
Subnet mask: Enter the subnet mask, generally it is 255.255.255.0
To Next Page
Loading...
