WPS is enabled. During this time (flashing WPS LED), you can
enable the wireless client to implement the WPS/PBC negotiation
between them. When the WPS connection is completed, the LED
indicator will be continuously lit. To add more clients, repeat the
above steps.)
PIN: If this option is enabled, you need to enter a wireless client’s
PIN code in the field and keep the same code in the WPS client.
Reset OOB: Press this button, the WPS client will be in an idle
state, and the WPS indicator will turn off. AP will not respond to the
WPS client’s connection request and will set the security mode as
Open-None (Disable) mode.
NOTE:
The use of WPS function requires the wireless adapter to support this
function.
5.2.2 WPA- PSK
WPA guarantees to protect WLAN users’ data and only the authorized
network users can have access to WLAN.
To Next Page
Loading...
