EasyManua.ls Logo

MICROPOINT qLabs ElectroMeter - Page 31

MICROPOINT qLabs ElectroMeter
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
heating pad.
2) Massage the nger with a downward motion several times
before performing the ngerstick.
3) Lower the hand to below the heart level when collecting the
blood drop.
2. Identify a site on the finger to puncture
1) On one of the middle ngers of either
hand.
2) Near the top of the nger on either side.
3) Away from any calluses or scars.
3. Clean the selected area with 70%
isopropyl alcohol, or an alcohol pad.
Dry thoroughly with cotton or gauze.
4. Puncture the finger following the
instructions for the lancet that you are
using.
5. Apply gentle, continuous pressure until a large, hanging
drop of blood forms.
6. Add blood sample. Apply the blood directly on the sample
well of the strip. The minimum sample volume is 10 µL.

Related product manuals