• 28 •
Adjusting the display’s backlight duration (BACKLIGHT TIME)
This option turns off the screen illumination after a selected period of time to conserve the analyzer’s
battery pack.
1. Press the
ARROW keys to highlight the UTILITIES SETUP icon, and press ENTER.
2. Press the
ARROW keys to highlight the DISPLAY icon, and press ENTER.
3. Press the
ARROW keys to highlight BACKLIGHT TIME, and press ENTER.
4. Press the
ARROW keys (or use the numeric keys) to adjust the time the display stays backlit
from 0 seconds (off) to 10 seconds.
5. Press
ENTER to select.
Selecting the language (LANGUAGE)
There are seven selectable languages in the Celltron ULTRA software for the display and printed
reports:
1. Press the
ARROW keys to highlight the UTILITIES SETUP icon, and press ENTER.
2. Press the
ARROW keys to highlight the LANGUAGE icon, and press ENTER.
3. Press the
ARROW keys (or use the numeric keypad) to move the dot to the option button of
your choice.
4. Press
ENTER to accept.
Using UPDATE to install new software
This utility enables you to update the analyzer’s software using an SD card. Contact your
Midtronics sales representative or Midtronics Customer service for information about the current version.
To update the software from a SD card containing the update fi les:
1. Insert the new memory card into the analyzer and press the
POWER key.
2. FILE NOT FOUND will appear on the display.
3. Press the
BACK key twice to display the Main Menu.
4. Press the
ARROW keys to highlight the UTILITIES SETUP icon, and press ENTER.
5.
Press the ARROW keys to highlight the UPDATE icon, and press ENTER.
6. SOFTWARE WILL BE CHANGED, DO YOU WANT TO CONTINUE? Press
ENTER to update
the analyzer’s software.
NOTE: It will take several minutes to complete the update.
Chapter 4: Utilities Celltron ULTRA
To Next Page
Loading...
Need help?
General
