• 43 •
===WARNING===
CONNECT TO
JAR XX
RED LEAD TO POSITIVE
POST, BLACK LEAD TO
NEGATIVE POST!
PRESS ‘5’ TO ADD JAR
NOTE: XX is the battery ID of the battery whose place is being taken.
3. If you press 5, the analyzer will add a placeholder to the stored data readings:
Battery XX
Voltage 0.0 volts
Conductance 0 mhos
When testing VOLTS THEN CONDUCTANCE, the PRESS 5 TO ADD JAR option is available only
during the voltage part of the test. During conductance testing the analyzer will skip batteries with
0 volts. You can add a placeholder by selecting the ADD BATTERY option in the REPORTS menu
at any time.
When testing is fi nished
You can add a placeholder later for a dead or missing battery via the ADD BATTERY option in the
REPORTS menu.
1.
Press the ARROW keys to highlight the REPORTS icon in the Main Menu, and press ENTER.
2. In the STRING INFO screen press the ARROW keys to highlight a string name.
3. In the test results screen, scroll to the battery after which you want the placeholder.
4. The analyzer will display:
INSERT PLACEHOLDER
0.0V and 0 MHOS
AT LOCATION
JAR XX
AND SHIFT OTHER DATA?
The place holder will be:
Battery ID 0
VOLTAGE 0.0 volts
Conductance 0 mhos
NOTE: To add the placeholder at the end of the data list, select the TEST icon, press
ENTER, and press the 5 key to add a jar.
Chapter 6: TestingCelltron ULTRA
To Next Page
Loading...
Need help?
General
