• 49 •
Printing the STRING SUMMARY results
1. Turn on the printer by pressing the MODE button.
2. Press the
ARROW keys to highlight the REPORTS icon, and press ENTER.
3. Press the
ARROW keys to highlight the STRING SUMMARY icon, and press ENTER.
4. Press the
ARROW keys to select the string name, and press ENTER.
5. Align the analyzer’s IR transmitter (to the right of the cable connector) with the IR receiver on
the printer (below the
MODE button).
6. Press the
PRINT key. Keep the IR transmitter and receiver aligned for as long as it takes
to print.
7. Press the
BACK key to end.
Printing the JAR DATA results
1. Turn on the printer by pressing the MODE button.
2. Press the
ARROW keys to highlight the REPORTS icon, and press ENTER.
3. Press the
ARROW keys to highlight the JAR DATA icon, and press ENTER.
4. Press the
ARROW keys to select the string name, and press ENTER.
5. Press the
ARROW keys to select a jar or strap screen, and press ENTER.
6. Align the analyzer’s IR transmitter (to the right of the cable connector) with the IR receiver on
the printer (below the
MODE button).
7. Press the
PRINT key. Keep the IR transmitter and receiver aligned for as long as it takes
to print.
8. Repeat steps 5, 6, and 7 for each screen you want to print.
9. Press the
BACK key to end.
Chapter 7: Test results and reportsCelltron ULTRA
To Next Page
Loading...
Need help?
General
