Miele cva 610 - Selector Switch Removal

Technical Information
47
CVA 610/CVA 615 Coffee Systems
5.18 Selector Switch Removal
1. Open the door.
2. Remove the rear door panel and fascia panel cover; see Sections 5.15 and 5.16.
3. Disconnect the connections from the selector switch.
4. Remove the switch knob (Figure 5-15, Item 9).
5. Remove the selector switch with its housing from the fascia.
6. Remove the selector switch retaining screws.
7. Remove the selector switch from its housing.
Figure 5-15: Selector Switch
5.19 Selection/Display Electronic Removal
1. Open the door.
2. Remove the rear door panel and fascia panel cover; see Sections 5.15 and 5.16.
3. Pull off the pushbutton knobs (Figure 5-16, Item 1).
4. Disconnect the connections from the selection electronic (Figure 5-16, Item 7).
5. Remove the screws securing the selection electronic (Figure 5-16, Item 6).
Remove the selection electronic.
6. Remove the screws securing the display electronic (Figure 5-16, Item 3).
Remove the display electronic.