Miele cva 610 - Brew Unit Removal and Water Issues

Technical Information
61
CVA 610/CVA 615 Coffee Systems
Figure 5-32: Releasing the Ram on the Underside of the Brew Unit
6. Push the ram upward, the turn the brew unit right-side up and pull the ram out of
the brewing chamber.
7. Clean the brewing chamber (Figure 5-33), ram and bottom filter by hand with
warm water without detergent, then dry.
8. Apply silicone grease to the ram lubrication points (Figure 5-34, Item 3).
Figure 5-33: Brewing Chamber inside Brew Unit Assembly