Miele cva 610 - Dispenser Assembly Installation

Technical Information
49
CVA 610/CVA 615 Coffee Systems
Figure 5-17: Dispenser Assembly Components
1
Screw
6
Connection hose
2
Drip tray (select models)
7
Outlet
3
Underlay
8
Retainers
4
Outlet
9
Dispenser assembly
5
Cable holder
10
Cover
5.21 Dispenser Assembly Installation
1. Slide the outlet (Figure 5-17, Item 7) onto the connection hose (Figure 5-17, Item 6).
2. Position the dispenser assembly (Figure 5-17, Item 9) in the cover (Figure 5-17,
Item 10).
3. Clip the outlet (Figure 5-17, Item 7) in the cover (Figure 5-17, Item 10).
Note:
The two screws for the coffee dispensing nozzle should be tightened only by hand
as they can easily be over-tightened.
4. Install the coffee dispensing nozzle in the frame.
5. Install the white panel and screws.