Miele cva 610 - Steam Valve and Steam Valve Switch (S79) Removal

Technical Information
50
CVA 610/CVA 615 Coffee Systems
5.22 Steam Valve and Steam Valve Switch (S79) Removal
1. Open the door.
2. Remove the rear door panel and fascia panel cover; see Sections 5.15 and 5.16.
3. Pull off the switch knob (Figure 5-18, Item 8).
4. Remove the screws securing the mounting bracket (Figure 5-18, Item 3) to the
rear door panel.
5. Remove the mounting bracket/valve assembly.
6. Remove the steam generator switch screws (Figure 5-18, Item 10).
7. Remove the steam generator switch (Figure 5-18, Item 1).
8. Disconnect the steam generator switch connections.
9. Remove the screws securing the valve housing to its mounting bracket (Figure 5-
18, Item 4).
10. Separate the valve housing from its mounting bracket.
11. Release the clips securing the hoses to the valve housing.
Figure 5-18: Components of Steam Valve and Steam Valve Switch
1
Steam generator switch (S79)
6
Steam valve housing
2
Shield
7
Steam valve insert
3
Bracket screws
8
Switch knob
4
Valve housing screws
9
Switch feeler
5
Mounting bracket
10
Switch screw
5.23 Hot-Water Nozzle Removal
1. Open the door.
2. Remove the rear door panel and fascia panel cover; see Sections 5.15 and 5.16.
3. Loosen the nut (Figure 5-19, Item 2).