Cleaning and care
132
The evaporation of residual moisture
will begin after the third rinse.
Remove the container and tube from
the oven.
Close the door.
Confirm with OK.
Steam can cause scalding.
Do not open the door while the
residual moisture is being
evaporated.
The oven heating will switch on and the
duration of the evaporation process will
count down in the display.
During the evaporation process, the
duration may be adjusted by the system
according to how much water is
currently present.
At the end of the evaporation process a
message will appear in the display with
advice on cleaning after running the
descaling programme.
Confirm with OK.
A buzzer will sound if buzzer tones are
switched on. Process finished appears in
the display.
Switch the Dialog oven off.
Danger of burning!
Allow the oven interior and
accessories to cool down before
cleaning them.
Remove the universal tray with the
collected liquid and empty it.
When the Dialog oven has cooled
down, clean away any remaining
water and descaling agent residues.
Leave the oven door open until the
oven interior is completely dry.
To Next Page
Loading...
