Miele DO 7860 - Automatic Programmes; Notes on Use

Automatic programmes
94
Your Dialog oven has a wide range of
Automatic programmes to enable you
to achieve excellent results with ease.
Simply select the appropriate
programme for the type of food you are
cooking and follow the instructions in
the display.
Most of the Automatic programmes
use MChef technology. Settings, e.g.
the number of Gourmet Units and the
Intensity, are automatically set in these
programmes. Recipes for Automatic
programmes can be found in the
Dialog oven cookbook.
An overview of applications is given at
the end of this document in "Overview
of Automatic programmes".
Notes on use
– After cooking, allow the oven
compartment to cool down to room
temperature again before starting an
Automatic programme.
– You can change the start time for an
Automatic programme with Start later,
Start at or Finish at.
– Some Automatic programmes require
a pre-heating phase before food can
be placed in the oven. A prompt will
appear in the display indicating when
this needs to be done.
– Some Automatic programmes require
the addition of liquid or another
ingredient during cooking. A prompt
will appear to tell you when to do so
(e.g. Add liquid at approx....)..
– The duration quoted for Automatic
programmes is an estimate. It may
increase or decrease depending on
the programme. When using the food
probe, the duration will be
determined by when the core
temperature is reached. The duration,
in particular with meat, will vary
depending on the initial temperature
of the food.
– If by the end of an Automatic
programme the food is not cooked
enough, selectContinue cooking
orContinue baking. Conventional
heating will then be used for
2minutes to continue cooking or
baking the food.