Miele DO 7860 - Operation: M Chef Functions; Basic Operation; Cooling Fan

Operation: MChef functions
68
Basic operation
 Switch the Dialog oven on.
The main menu will appear.
 Select M Chef.
 Select Gourmet Profi.
 Select the function you want.
The function, recommended
temperature and Gourmet Units will
appear.
The oven heating and cooling fan will
switch on.
The recommended settings are
suitable for most food. It is not
essential to set a specific number of
Gourmet Units.
If the recommended settings are used,
the food will be cooked and browned
by the heating elements from the
outside, and Gourmet Units will be
automatically added to the food. This
stops in the following instances:
– A maximum value of 2000
Gourmet Units has been reached.
– You interrupt the addition of
Gourmet Units by selecting Stop.
– You end the cooking programme.
Information on setting recommended
values can be found under "Advanced
operation".
 Change the recommended
temperature if necessary.
 Confirm with OK.
 Open the door and place the food in
the oven.
 Close the door and confirm with OK.
The required temperature will appear in
the display, followed shortly by the
addition of Gourmet Units in addition to
the conventional heating method. The
number of Units can be followed in the
display.
A buzzer will sound when the selected
temperature is reached as long as
buzzer tones have been switched on.
After the cooking process:
 Take the food out of the oven.
 Switch the Dialog oven off.
Cooling fan
The cooling fan runs at a higher speed
with MChef functions.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven compartment, on the
control panel or on the oven housing
unit.
The cooling fan will switch itself off
automatically after a certain period of
time (see “Settings – Cooling fan run-
on”).