Miele DO 7860 - Starting Residual Moisture Evaporation Immediately; Skipping Residual Moisture Evaporation

Functions using moisture
93
Starting residual moisture
evaporation immediately
Steam can cause scalding.
Do not open the door while the
residual moisture is being
evaporated.
 Select the MChef + Moisture
Plus function, the Moisture
Plus function, or an Automatic
programme that uses moisture.
Evaporate residual moisture? appears in
the display.
 Select Yes.
Evaporate res. moisture and a time
appear in the display.
The residual moisture evaporation
process will start. You can follow the
time counting down in the display.
The time shown in the display will
depend on the amount of residual water
left in the system. During the
evaporation process, the duration may
be adjusted by the system according to
the amount of water currently present.
At the end of the residual moisture
evaporation process Process finished
appears.
 Touch .
A cooking process using MChef +
Moisture Plus, Moisture Plus or
an Automatic programme using
moisture can now be carried out.
While the residual water is evaporating,
the moisture will condense on the door
and in the oven interior. This moisture
needs to be wiped off after the oven
has cooled down.
Skipping residual moisture
evaporation
 Skipping the residual moisture
evaporation process can, in certain
cases, cause water to overflow into
the oven compartment.
It is best not to cancel the
evaporation process.
 Select the MChef + Moisture
Plus function, the Moisture
Plus function, or an Automatic
programme that uses moisture.
Evaporate residual moisture? appears in
the display.
 Select Skip.
A cooking process using MChef +
Moisture Plus, Moisture Plus or
an Automatic programme using
moisture can now be carried out.
You will be prompted to carry out
residual water evaporation the next time
you select MChef + Moisture Plus,
Moisture Plus, or an Automatic
programme that uses moisture, as well
as when you switch the Dialog oven off.