Miele DO 7860 - Module Settings

Settings
45
Module settings
We recommend connecting your Dialog
oven to your Wi-Fi network with the
help of the Miele@mobile App or via
WPS.
If you would rather set up the
connection to your router yourself, or
you have a special network
configuration, you can enter the
relevant settings yourself if you have the
necessary technical knowledge.
– Module status
– Start module activity
– Restart
– Restart with default settings
– Restart in Service mode
– IP settings
– IP set to auto-retrieve
– IP address
– Subnet mask
– Standard gateway
– DNS settings
– DNS set to auto-retrieve
– DNS server 1
– DNS server 2
– SSID settings
– Enter SSID
– Search SSID
– Network encryption
– Authentication
– Network code
Select Network status to show the
current module settings.
Starting module activity
If you wish to reset all entered settings
and values for Miele@home, you can
restore the factory default settings on
your Wi-Fi module. Any settings that do
not affect Miele@home will remain
unchanged.
 Select Restart with default settings and
confirm with OK.
Please wait appears in the display.
A few minutes later Restart successful
will appear in the display.
 Confirm with OK.
The Wi-Fi module has been reset to its
factory default settings.
If the factory default settings were not
restored to your Wi-Fi module, repeat
the instructions above.