EasyManuals Logo
Home>Miele>Washer>PWM 908

Miele PWM 908 User Manual

Miele PWM 908
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
Warning and safety instructions
13
Only use dyes suitable for use in a washing machine. Always ob-
serve the manufacturer's instructions carefully.
Colour run and dye removers contain sulphur compounds which
can cause damage such as corrosion. Do not use these products in
this washing machine.
Avoid contact between stainless steel surfaces (front, lid, casing)
and liquid detergents or disinfecting agents which contain chlorine or
sodium hypochlorite. These agents can have a corrosive effect on
stainless steel. Aggressive vapours containing chlorine can also be
corrosive. Do not store open containers of these agents near the ma-
chine.
Do not use a pressure washer or hose to clean the washing ma-
chine.
It is particularly important to observe manufacturer's instructions
when using a combination of cleaning agents and special application
products. Products must only be used for applications approved by
the manufacturer to avoid any material damage or the occurrence of
strong chemical reactions.
If detergent has come into contact with the eyes, rinse out imme-
diately with plenty of lukewarm water. If detergent has accidentally
been ingested, seek medical advice immediately. People with dam-
aged or sensitive skin should avoid contact with detergent.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele PWM 908 and is the answer not in the manual?

Miele PWM 908 Specifications

General IconGeneral
Door hingeRight
Water fillCold, Hot
Drum volume73 L
Control typeTouch
Loading typeFront-load
CertificationCE, VDE-EMV, VDE, WEEE, IPX4
Product colorSilver
Built-in displayYes
Custom panel-ready-
Door opening angle167 °
Appliance placementFreestanding
Package depth768 mm
Package width660 mm
Package height940 mm
Package weight107000 g
Current10 A
Connected load5500 W
AC input voltage400 V
AC input frequency50 Hz
Water consumption per cycle- L
Energy consumption washing per cycle- kWh
Drum capacity8 kg
Delay start (max)96 h
Spin-drying classA
Maximum spin speed- RPM
Noise level (spin)70 dB
Noise level (wash)46 dB
Weight and Dimensions IconWeight and Dimensions
Depth714 mm
Width605 mm
Height850 mm
Weight103000 g

Related product manuals