Supervisor level
97
Remote
Programmes are selected on an ex-
ternal terminal.
Factory default: Off
RemoteUpdate
The RemoteUpdate function is used for
updating the software in your washing
machine.
The RemoteUpdate function is deactiv-
ated as standard.
If you do not install a RemoteUpdate,
you can continue to use your washing
machine in the usual way. However,
Miele recommends installing Re-
moteUpdates.
Activation
The RemoteUpdate menu option is
only displayed and can only be selec-
ted if you have added your washing
machine to your WiFi network.
Miele’s RemoteUpdate function can
only be used if the washing machine is
connected to a WiFi network and you
have an account in the Miele Profes-
sional app. The washing machine must
be registered with your account in the
app.
See the Miele Professional app for
terms and conditions of use.
Some software updates can only be
carried out by Miele Service.
Running a RemoteUpdate
If a RemoteUpdate is available for your
washing machine, it will be displayed
automatically when the operator level is
open.
You can choose to start the RemoteUp-
date immediately or wait until later. If
you select “Start later”, the prompt to
run the RemoteUpdate will be displayed
again the next time you switch on your
washing machine.
The RemoteUpdate can take a few
minutes.
Please note the following information
about the RemoteUpdate function:
– You will only receive a message when
a RemoteUpdate is available.
– Once a RemoteUpdate has been in-
stalled, it cannot be undone.
– Do not switch off the washing ma-
chine during a RemoteUpdate. Other-
wise, the RemoteUpdate will be
aborted and will not be installed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
