Miele PWM 908 User Manual

Cleaning and care
57
Cleaning the drum, suds con-
tainer and drainage system
The drum, suds container, and drainage
system can be cleaned if necessary.
 Start the Clean machine programme.
 Add powder detergent to the 
compartment in the detergent drawer.
 At the end of the programme, check
the inner drum and remove any
coarse residues.
Use the Clean machine programme
regularly if you frequently use disin-
fection programmes.
Cleaning the water inlet filters
The washing machine has filters to pro-
tect the water inlet valve. Check these
filters every 6 months or so. Check the
filters more often if there are frequent
interruptions to the external water sup-
ply.
Cleaning the filters in the inlet hoses
 First turn off the stopcock.
 Unscrew the inlet hose from the stop-
cock.
 Remove the rubber seal 1 from the
recess.
 Using pointed pliers, take hold of the
plastic filter bar 2 and pull it through
the filter.
 Clean the plastic filter.
 Reassemble in reverse order.
Make sure there is no water leaking
from the screw thread.
Tighten the screw thread.

Miele PWM 908 Specifications

General

Door hinge	Right
Water fill	Cold, Hot
Drum volume	73 L
Control type	Touch
Loading type	Front-load
Certification	CE, VDE-EMV, VDE, WEEE, IPX4
Product color	Silver
Built-in display	Yes
Custom panel-ready	-
Door opening angle	167 °
Appliance placement	Freestanding
Package depth	768 mm
Package width	660 mm
Package height	940 mm
Package weight	107000 g
Current	10 A
Connected load	5500 W
AC input voltage	400 V
AC input frequency	50 Hz
Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Drum capacity	8 kg
Delay start (max)	96 h
Spin-drying class	A
Maximum spin speed	- RPM
Noise level (spin)	70 dB
Noise level (wash)	46 dB

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	103000 g