6. Starting the programme – the end of the programme
33
Payment system
If your machine is connected to a pay-
ment system, the amount of payment
required will appear in the display.
Do not cancel the programme once it
has started. Depending on the set-
tings, money may be lost in the pay-
ment system.
Starting the programme
The programme can be started as soon
as the Start/Stop sensor is flashing on
and off.
Touch the Start/Stop sensor control.
The door will lock ( symbol) and the
programme will start.
If a delay start period has been selec-
ted, this will appear in the display.
Once the delay start period has elapsed
(if applied), the programme duration will
appear in the display; otherwise, the
duration will appear straight away. The
programme sequence is also shown in
the display.
Tip: You can use the pull-down menu to
display the selected temperature, spin
speed and any selected Extras.
End of programme
The door remains locked during the
anti-crease phase. However, the wash-
ing machine door can be unlocked at
any time by touching the Start/Stop
sensor.
Unloading the drum
Pull open the door.
Remove the laundry.
Items left in the drum could discolour
other items in the next wash or be-
come discoloured themselves.
Remove all items from the drum.
Check the door seal for any foreign
objects.
Tip: Leave the door slightly open to al-
low the drum to dry.
Switch the washing machine off with
the control.
If applicable, remove the used cap-
sule from the detergent drawer.
Tip: Leave the detergent drawer slightly
open to allow it to dry.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
