Miele PWM 908 User Manual

Installation
80
Drainage
Drain valve
The machine is drained using a motor-
ised drain valve. A DN70 angle con-
nector can be used for draining the ma-
chine via an on-site floor drain (gully
with odour trap).
Drain pump
The suds are drained through a drain
pump with a 1m delivery head. For the
water to drain freely, the hose must be
free of kinks. The elbow piece (access-
ory) can be hooked onto the end of the
hose.
Drainage options
1. Connected securely to a plastic drain
pipe with a rubber nipple (there is no
need to use a siphon).
2. Connected securely to a washbasin
with a plastic nipple.
3. Connected securely to a floor drain
(gully).
If required, the hose can be extended to
a length of up to 5m. Accessories are
available from Miele or from your Miele
dealer.
For a drain height of more than 1m (up
to a max. of 1.6m), a replacement drain
pump is available from Miele or from
your Miele dealer.

Miele PWM 908 Specifications

General

Door hinge	Right
Water fill	Cold, Hot
Drum volume	73 L
Control type	Touch
Loading type	Front-load
Certification	CE, VDE-EMV, VDE, WEEE, IPX4
Product color	Silver
Built-in display	Yes
Custom panel-ready	-
Door opening angle	167 °
Appliance placement	Freestanding
Package depth	768 mm
Package width	660 mm
Package height	940 mm
Package weight	107000 g
Current	10 A
Connected load	5500 W
AC input voltage	400 V
AC input frequency	50 Hz
Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Drum capacity	8 kg
Delay start (max)	96 h
Spin-drying class	A
Maximum spin speed	- RPM
Noise level (spin)	70 dB
Noise level (wash)	46 dB

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	103000 g