EasyManuals Logo
Home>Miele>Washer>PWM 908

Miele PWM 908 User Manual

Miele PWM 908
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #96 background imageLoading...
Page #96 background image
Supervisor level
96
COM module selection
This washing machine is equipped
with an integrated WiFi module. How-
ever, the washing machine can also be
equipped with an external module.
Off
Internal module (factory default)
The internal WiFi module is used.
External module
An XKM module or RS232 module is
inserted into the module slot.
WiFi
Control the networking of your wash-
ing machine.
Setup
This message only appears if the
washing machine has not yet been
connected to a WiFi network.
Deactivate (visible when the network
is activated)
The network remains set up; the WiFi
function is switched off.
Activate (visible if the network is de-
activated)
The WiFi function is reactivated.
Connection status (visible when the
network is activated)
The quality of WiFi reception
The network name
The IP address
Set up again (visible if already set up)
Resets the WiFi login (network) to im-
mediately re-establish a new connec-
tion.
Reset (visible if already set up)
The network is no longer set up. A
new connection has to be estab-
lished in order to use the network
again.
The WiFi is switched off
The WiFi connection will be reset
to the factory default setting
Network time
The date and time can be synchron-
ised over the network.
Off
The date and time are not synchron-
ised over the network.
As master
The machines are in a network but
are not connected to the Internet. A
machine is declared as the master
and sends data to the slave devices.
As slave
The machines are in a network and
are connected to the Internet. All ma-
chines are configured as slaves. Data
is synchronised over the Internet.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele PWM 908 and is the answer not in the manual?

Miele PWM 908 Specifications

General IconGeneral
Door hingeRight
Water fillCold, Hot
Drum volume73 L
Control typeTouch
Loading typeFront-load
CertificationCE, VDE-EMV, VDE, WEEE, IPX4
Product colorSilver
Built-in displayYes
Custom panel-ready-
Door opening angle167 °
Appliance placementFreestanding
Package depth768 mm
Package width660 mm
Package height940 mm
Package weight107000 g
Current10 A
Connected load5500 W
AC input voltage400 V
AC input frequency50 Hz
Water consumption per cycle- L
Energy consumption washing per cycle- kWh
Drum capacity8 kg
Delay start (max)96 h
Spin-drying classA
Maximum spin speed- RPM
Noise level (spin)70 dB
Noise level (wash)46 dB
Weight and Dimensions IconWeight and Dimensions
Depth714 mm
Width605 mm
Height850 mm
Weight103000 g

Related product manuals