EasyManuals Logo

Miele PWM 908 User Manual

Miele PWM 908
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
Problem solving guide
62
An unsatisfactory wash result
Problem Cause and remedy
Liquid detergent does
not give the required
result.
Liquid detergents usually contain no bleaching
agents. They do not remove fruit, coffee, and tea
stains.
Use a general purpose powder detergent contain-
ing a bleaching agent.
Pour stain removers into the drawer in the dis-
penser compartment and liquid detergent into a
dispenser ball.
Never put stain removers and liquid detergent to-
gether in the dispenser drawer.
White residues which
look like powder deter-
gent are seen on dark
textiles after washing.
The detergent contained compounds (zeolites) to aid
water softening which are not soluble in water. These
have ended up on the laundry.
Try to brush off the residues with a soft brush once
the laundry is dry.
In future, wash dark textiles using a detergent
which contains no zeolites. Liquid detergents usu-
ally contain no zeolites.
Textiles with particularly
greasy soiling are not
properly clean.
Select a programme with pre-wash. Use liquid de-
tergent for the pre-wash.
Continue to use universal powder detergent for the
main wash.
The use of heavy-duty detergent is recommended in
the main wash for very heavily soiled work clothing.
Please seek advice from the detergent manufacturer.
Grey, greasy particles
cling to washed laundry.
Insufficient amounts of detergent were used. The
laundry was heavily soiled with grease (oils, oint-
ments).
Use more detergent or use liquid detergent with
this type of soiled laundry.
Before washing the next load, run a 60°C pro-
gramme with liquid detergent but without a load.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele PWM 908 and is the answer not in the manual?

Miele PWM 908 Specifications

General IconGeneral
Door hingeRight
Water fillCold, Hot
Drum volume73 L
Control typeTouch
Loading typeFront-load
CertificationCE, VDE-EMV, VDE, WEEE, IPX4
Product colorSilver
Built-in displayYes
Custom panel-ready-
Door opening angle167 °
Appliance placementFreestanding
Package depth768 mm
Package width660 mm
Package height940 mm
Package weight107000 g
Current10 A
Connected load5500 W
AC input voltage400 V
AC input frequency50 Hz
Water consumption per cycle- L
Energy consumption washing per cycle- kWh
Drum capacity8 kg
Delay start (max)96 h
Spin-drying classA
Maximum spin speed- RPM
Noise level (spin)70 dB
Noise level (wash)46 dB
Weight and Dimensions IconWeight and Dimensions
Depth714 mm
Width605 mm
Height850 mm
Weight103000 g

Related product manuals